Planet KVM-1600 User Manual

- 6 - Front Panel of 16-port KVM Switch: PC Port Select Bank Select KVM-160016

- 7 - 2.4 Hardware Installation Before installation, please make sure all of peripherals and computers have been turned off. Step 1 Rack Instal

- 8 - Step 5 Connecting VGA port of PC(s) to the KVM Switch Now the PC connections will be made with the monitor (VGA) connections first. Connect a

- 9 - keyboard port on the computer, and the other end to the PC1 keyboard port on the back of KVM unit. If your computer has an AT type keyboard po

- 10 - 2.5 Daisy Chain Connection Diagram Please use the bundle 3 feet 3-in-one daisy chain Cable Kit to daisy chain the KVM Switch. A. Connect Ke

- 11 - 2.6 Hot Plug The KVM Switch supports “Hot Plug“ function for easy addition or removal of PCs. The user can arrange or maintain PCs as follo

- 12 - NOTE: Some O.S. (Operation Systems) like SCO Unix are unable to support “ Hot Plug ” function. If you apply “Hot Plug” to this kind of O.S.,

- 13 - CHAPTER 3 OPERATION 3.1 Password Protection When you power on KVM switch, it will ask you the password, the default password is eight zero –

- 14 - Bank No. Port No. Bank Status Port Status 7-Segment LED Indication : You can press the button in

- 15 - the keyboard will be back to Operation System control state. Below are the different hot key commands: This combination Does This =

Trademarks Copyright  PLANET Technology Corp. 2002. Contents subject to revise without prior notice. PLANET is a registered trademark of PLANET Tec

- 16 - = Auto Scan = OSD default value (Note: 1.ROM re-flash command need take 1~3 min-utes. 2.Not including password) = Search

- 17 - 3.4 On Screen Display Operation When you pop up the OSD menu window, go through the hot key, you will see the following small window on your

- 18 - d. Use “ PgUp “ key or “ PgDn” key for selecting previous or next Bank no. (or Box No.) e. Press “INS” key for editing PC name. After fin

- 19 - There is an enter password window showed out when you select this item and then press the Enter. The maximum password is eight digits.

- 20 - k. When you finish the set up of PC name and get out of OSD setting mode, you will find the PC name showed at the up-left corner of monitor.

- 21 - CHAPTER 4 TROUBLESHOOTING 1. Ensure that all cables are well seated. Label all of cables with the number for each respective computer to av

- 22 - PS/2 mode with the correct adapter. Try a different mouse.  Avoiding moving the mouse or pressing the mouse buttons when switching ports. 

EM-KVM8V2

Instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause har

TABLE OF CONTENTS CHAPTER 1 INTRODUCTION ... 1 1.1 FEATURES...

- 1 - CHAPTER 1 INTRODUCTION Thank you for purchasing PLANET KVM switch. KVM switch can save your MONEY, TIME, SPACE, EQUIPMENT and POWER. The KVM-

- 2 - a visual interface to name and select computers  Hot Plug - Add PCs or Remove Connected PCs for Maintenance without Powering Down the KVM swi

- 3 - 1.3 Technical Specifications Model No. KVM-800 KVM-1600 PC Port 8 16 Console Port 1 Daisy Chain Port 1 PC Port Connector (All Female T

- 4 - CHAPTER 2 INSTALLATION 2.1 System Requirements KVM-800 Model No. 8 port KVM Switch Console side One VGA Monitor One PS/2 Keyboard One PS/2

- 5 - 2.2 Cable Diagrams PS/2 Cable: Mini Din 6 pin Male to Male , VGA Cable: HDB15 pin Male to Male AT to PS/2 keyboard adapt