Planet FRT-405N User Manual download pdf (Page 50)

User Manual of FRT-405N

5.3.4 WDS

WDS (Wireless Distribution System) allows access points to communicate with one another wirelessly in a

standardized way. It can also simplify the network infrastructure by reducing the amount of cabling required.

Basically the access points will act as a client and an access point at the same time.

WDS is incompatible with WPA. Both features cannot be used at the same time. A WDS link is bi-directional,

so the AP must know the MAC address of the other AP, and the other AP must have a WDS link back to the

AP.

Dynamically assigned and rotated encryption key are not supported in a WDS connection. This means that

WPA and other dynamic key assignment technologies may not be used. Only Static WEP keys may be used

in a WDS connection, including any STAs that are associated with a WDS repeating AP.

Enter the MAC address of the other APs that you want to link to and click enable. Supports up to 4 point to

multipoint WDS links, check Enable WDS and then enable on the MAC addresses.

WDS Mode: There are four options, including Disable, Lazy Mode, Bridge Mode, and Repeater Mode.

Disable

Select Disable to disable the WDS mode.

Lazy Mode

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 107 108

No comments

Planet FRT-405N User Manual Page 50