Planet ADN-4100 User Manual download pdf (Page 15)

2 Hardware Installation

Step 1 Connect the LINE interface of the device and the Modem interface of

the splitter with a telephone cable. Connect the phone set to the

Phone interface of the splitter through a telephone cable. Connect the

input cable to the Line interface of the splitter.

The splitter has three interfaces:

 Line: Connect to a wall phone interface (RJ-11 jack).

 Modem: Connect to the LINE interface of the device.

 Phone: Connect to a telephone set.

Step 2 Connect the LAN interface of the device to the network card of the PC

through an Ethernet cable (MDI/MDIX).

Note:

Use the twisted-pair cable to connect the hub or switch.

Step 3 Insert one end of the power adapter to the wall outlet and connect the

other end to the POWER interface of the device.

Connection 1: Figure 3 shows the connection of the device, PC, splitter, and

telephone set,

when no telephone set is placed before the splitter. This type of

connection is recommended.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 103 104

No comments

Planet ADN-4100 User Manual Page 15