Planet ENW-9701 User Manual

4 User’s Manual ENW-9701 PCI-E Single Port Gigabit Fiber Adapter

8. Please click “Finish” to complete the driver installation. 13

3.2 Installing Driver to Windows XP 1. After installing ENW-9701 to your PC and boot up, Windows XP will detect it and ask you to install driver. Pl

3. WinXP will show this dialog box to prompt you the driver has not passed Windows logo testing, please click “Continue Anyway”, then WinXP will sta

3.3 Installing Driver to Windows 2008 The following installation uses ENW-9701 and operates under Window2008Procedures will be similar to the Windo

3. On the Realtek RTL8168xxxx window, please click “Update Driver…” button. 4. Click “Browse my computer for driver software” button. 17

5. Click “Let me pick from a list of device drivers on my computer” button. 6. Click “Have Disk…” button. 18

7. Click “Browse…” button to specify the driver location to install. (Assume "D" is your CD-ROM drive, the driver can be found in D:\) then

9. During the Driver installation, it will pop up one Windows Security message. Please Click “Install this driver software anyway” button for cont

3.4 Installing Driver to Linux Requirements: - Kernel source tree (supported Linux kernel 2.6.x and 2.4.x) - For linux kernel 2.4.x, this driver

2. Set by doing configurations in /etc/sysconfig/network-scripts/ifcfg-ethX for Redhat and Fedora /etc/sysconfig/network/ifcfg-ethX for SuSE.

Copyright Copyright © PLANET Technology Corp. 2011. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, sto

Chapter 4 Specifications Product ENW-9701 1000Base-SX / LX PCI Express Fiber Adapter Hardware Specification Attachment Interface PCI Express Hos

EC Declaration of Conformity For the following equipment: *Type of Product : 1000Base-X SFP PCI Express Gigabit Ethernet Adapter *Model Numbe

Table of Contents CHAPTER 1 INTRODUCTION... 7 1.1 Pack

Chapter 1 Introduction PLANET ENW-9701 PCI Express Gigabit Fiber adapter can provide the best solution for one of the major issues of Local Area Net

Chapter 2 Hardware Installation 2.1 LED Definition The faceplate of ENW-9701 has one LED: Link / ACT. The pictures below have showed the faceplate o

2.2 Hardware Installation Step 1: Please turn off your PC. Step 2: Remove any metal decorations from your hands and wrists. Step 3: Remove the

Chapter 3 Driver Installation A device driver must be installed before your ENW-9701 can be used with your computer. This chapter describes how to i

5. Please click “Browse” to find the driver location. (Assume "E" is your CD-ROM drive, the driver can be found in E:\Drivers\Win2K). Af

6. Please click “Next” to continue. 7. You can see the device name in this dialog box. If the device name is correct, please press”Yes” to continu